| Model |
A (Standard Type) |
B (Optional） |
C (Optional） |
D (Optional） |
E (Optional） |
| Colour |
Gray |
Orange |
Blue |
Red |
Green |
| CPU |
4 Core 1.44GHz |
4 Core 1.44GHz |
8 Core 2.0GHz |
8 Core 2.0GHz |
8 Core 2.0GHz |
| RAM |
2G |
3G |
2G |
3G |
4G |
| ROM |
16G |
32G |
16G |
32G |
64G |
| Operation System |
Built-in Android 7.0 operation system (Can install any application program or software for your requirement) |
| Bluetooth 4.0 |
Transmission distance: 10 meters, support wireless headset answering |
| Power Supply |
8200mAh lithium battery, PON work time 3 hours；Input: 5V/3A; Output: 5V/1A |
| Working Temperature |
-20℃–70℃ (Battery can only work -10~+60℃) |
| Humidity |
5% – 95% |
| Size |
180*87*49mm |
| Weight |
580g (with battery) |
| Optical Port |
1 Universal Optical Power Meter Port； 1 Universal Visual Fault Locator Port； 1 SC PON Port |
| Display |
5.0 inch ; Resolution: 720*1080 ; Touch screen, support signature |
| Camera |
Front camera: 5million pixels; Rear camera: 13million pixels; Support camera/photography; support autofocus and flash function |
| Optical Port |
1 Universal Optical Power Meter Port
1 Universal Visual Fault Locator Port
1 SC PON Port |
| Electric Port |
2 1000Mbps RJ45 Ports;
1 HDMI Port;
1 RJ45 Port;
1 RJ11 Port;
1M micro USB Port;
1 Charging Port;
1 headset Port |
| Supported Network Standard |
GSM B3/8
CDMAx1 / CDMA2000 BC0
WCDMA B1/8
TD-SCDMA B34/49
FTE FDD B1/3
TD-LTE B38/39/40/41 (Need to confirm local network standard (Frequency) before make orders (With Dual sim in the PDA)) |
| Computer simulation function |
Ping/ Ifconfig/ Route/ Traceroute/ Network Neighbor/ FTP Server/ PPPOE Dialing/ LOID write/ Elink Protocol |
| Added value service |
Barcode scanner, ID card Reader (Only for china ID Card now), |
| Optical Power Meter |
Wavelength: 800nm-1700nm
Detector Size: In GaAs Ф0.3mm (Ф1.0mm, Ф2.0mm Optional)
Calibrated Wavelength(nm): 850\1300\1310\1490\1550\1577\1625
Measurement Range (dBm): -70 ~ +10 (-50~+26 is optional) |
| Visual Fault Locator |
Working wavelength: 650±10nm
Output optical: 10MW (1/5/20mw\30mw\40mw\50mw optional)
Test distance: ≥7Km
Modulation frequency: continuous light / 2Hz modulated light |
| Cable Tracing |
Test cable type: Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.
Line status test: Determine open or short circuit
Voltage polarity: Positive and negative of DC voltage
The distance of signal transmission: ≥ 3km
DC Voltage: No more than 48V |
| Cable Line Sequence |
| HDMI simulation TV |
The handheld terminal has an HDMI port, which can receive the HDMI signal output from the set-top box, and play and display the sound and video content through the handheld terminal. VGA/720P/1080P three-mode simulation is supported, Adaptive resolution is supported. |
| IPTV Test |
MDI: MLR (TS loss packet ); MDI: DF (TS delay); RTP packet loss; RTP jitter; TS bandwidth; Source Mac, Dest Mac, Vlan priority, IP Tos, IPttl, Source IP, Dest Ip, Source Port, Dest Port, Rtp Type, network protocol, encoder parameters (coding level, video resolution, frame rate, code rate, audio sampling rate, channel number, etc.); support synchronous decoding to play audio and video (Need to connect to local Set box to get and analysis packets before testing) |
| Speed Test |
Basic Module: 100M bps (Speed Test app)
Enhanced module (Optional):1000M bps (Need to follow protocol before mass production) |
| ONU Test |
Supports GPON and EPON. After establishing a synchronous link with the central office, it can display the link information, network information, and remote connection information. The link information can be used to check whether the ONU (including the E8-C) is registered with the authentication success, the link parameters, and so on. The network information can be used to check the error code and the number of lost packets. The remote information includes the TR069 connection status and the service delivery status. (Need to follow local protocol before mass production) |
| To emulate user’ s ONU(ONT) to exclude the faulty of user’ s ONU(ONT) |
| IoT Platform |
Built-in positioning module, mobile network and other modules provide a unified management and control platform for PDA, realize management and statistics of work orders and personnel tracks; realize personnel, authority, data and other analysis functions of management platform; realize remote batch upgrade and operation and maintenance of software Data analysis and integrated management (only support chinese now) |
| Electric high voltage alarm |
Sensing distance: 220V≥ 0.3M; 380V≥ 0.5M; 6KV≥ 2M; 10KV≥ 3M; 35KV≥ 8M |
| Packages |
PDA, charger, Protective Bag, Data line, Manuel, Packing list, certified report |
